FAQS

• NO! NO! NO! 
• They are not made for highway use. They are made for off road only and slow speeds. 

Nickel Chrome Finish 

Yes! We do not outsource the builds of our EZY Wheels. They are made in Wonderful Washington, Missouri. We use only USA Steel. Many of the machines that we use to build our products come from Washington, Missouri. We do source our hubs from overseas. 

Absolutely. This is a great way to move your container side to side or in its own tracks. On the non-door side of the container they install the exact way they do on the sides. On the door-end of the container, we suggest to put a 2x4 between the EZY Wheel and the container, this insures that the wheels stay vertical and protects your doors. 

• They are rated the same! The reason for the two difference sizes are for wheel and tire availability. We love to save you money, so if you want to use your own wheels and tires. 
• Size for 8 Lug are 8x6.5 (many old truck wheels and tires work, check before purchasing) 
• Size for 6 Lug are 6x5.5 (this is a standard chevy half ton truck size, in some cases the center hole may be too small. It need 3.5 inches center hole - we recommend buying the EZY Wheels before you purchase used wheels and tires from another source.) 

• Yes we do regularly. Please call for overseas orders, as there is additional shipping costs. 
• Phone number is (636)-900-4608 

Absolutely. This is a great way to move your container side to side or in its own tracks. On the non-door side of the container they install the exact way they do on the sides. On the door-end of the container, we suggest to put a 2x4 between the EZY Wheel and the container, this insures that the wheels stay vertical and protects your doors. 

EZY Wheels are designed to move 8800 pounds per end of container. So they would work on a container weighing less than 17,600 pounds total weight, if the weight is evenly distributed. We do recommend leaving your container as empty as possible. A lot of equipment will not lift the other end of the container with that weight added, which would make it hard to move the container. 

Answer text

Shipping is free is the lower 48 states. 

On average ground clearance is 12”. You can adjust this by your tire size. If you need maximum ground clearance, old tall mud truck tires work great. This also helps on soft ground, as a shipping container is super heavy. 

No, from our experience paint and powder coat chip and do not withstand the tough conditions that they are designed to work in. 

• Yes, this is my personal cell phone number, give me a call and I will personally take care of the situation. 
• CEO Jason Witte, 636-346-6419 
• We stand behind everything we build. 

Approximately 12” past the container depending on your tire. 

• Ratchet straps are to insure that the EZY Wheels do not come off your container if your container would go high centered while moving. 
• The ratchet straps are used to keep the EZY Wheels from rotating and unlocking while in use. There is no significant tension on the straps. 

Our EZY Wheels are designed to work with most standard trailer wheel backspacing. Most truck tire backspacing also work. We highly suggest test fitting your wheels and tires to the EZY Wheels before purchasing from other places. Most of the time they will fit, but we cannot guarantee as there are so many different variants of tires. 

Our EZY Wheels are designed to work with most standard trailer wheel backspacing. Most truck tire backspacing also work. We highly suggest test fitting your wheels and tires to the EZY Wheels before purchasing from other places. Most of the time they will fit, but we cannot guarantee as there are so many different variants of tires. 

• Our HD EZY Lift is designed for larger bottle jacks, 12 ton. The overall size is larger to accommodate for the larger jack 
• Our Standard EZY Lift will do everything the larger one will do but will save you money if you have to buy a jack. It works with the smaller 8 Ton bottle jacks. 
• The circle size on the inside are the same size. 

• A Container Nut is a patented device used to attach temporary or permanent fixtures to shipping containers. 
• A Container Nut comes with Grade 8 3/4 standard SAE Bolts. You can also use your own if your application varies. 
• A Container Nut is designed to be a very strong attaching point to the ISO Pocket of a container. 
• Great for attaching cameras, lighting, ladders, hand rails, roof truss or anything you can come up with. 

• Just about anything you can dream up.
• They are great for bolting containers together.
• They are great for adding accessories to your container such as cameras, 
• lighting, ladders, awnings, strut bars, roof truss, hand rails, and so much more. 

• Grade 1018 Cold Rolled American Steel
• Nickel Chrome Finish 

• The Universal Container Nut will work in the Stadium holes and Shield holes. 
• The Twist Nut will only work in the Stadium holes.
• The Universal Container Nut has two 3/4 inch bolt holes while the Twist Nut 
• only has one 3/4 inch bolt hole. 

It is a device to mount accessories easily. It allows you to mount accessories to a container to build off of a container with ease. 

Grade 1018 Cold Rolled American Steel • Nickel Chrome Finish 

• Just about anything you can dream up.
• They are great for bolting containers together.
• They are great for adding accessories to your container such as cameras, lighting, ladders, awnings, strut bars, roof truss, hand rails, and so much more. 

• A Twist Nut is designed specifically for the Stadium Holes of a container. All the bottom side and front hole of all standard shipping containers are stadium. 
• The side holes of the shipping container top (the long sides of the container) are also Stadium holes and work with Twist Nuts. 
• They do NOT work in the Shield Hole. (The holes at the door end, top of the container and the back end top holes) 

• The Universal Container Nut will work in the Stadium holes and Shield holes. 
• The Twist Nut will only work in the Stadium holes.
• The Universal Container Nut has two 3/4 inch bolt holes while the Twist Nut 
• only has one 3/4 inch bolt hole. 

• The Twist Nut is specifically designed for quick and easy installation. It can be attached to your product or accessory prior to installation and simply twist and lock into place while tightening the fastener, making it easier to install. 
• The Universal Container Nut uses two bolts and requires a little more effort to install but is stronger and will work in the Stadium hole as well as the Shield hole. 
• Both are ideal for both permanent and temporary fixtures. 

• You put them in the lower ISO Pockets, turn them and then anchor them into the ground with an anchor bolt. 
• The bolts are not included but they are found at most hardware stores. 

• The standard EZY Twist lock accommodates a 3/4 inch anchor and is made of 3/8 steel. 
• The HD EZY Twist Locks accommodate a 1 inch anchor and are made with 1/2 inch steel. 

In most cases a set of 4 will do the trick. You can put two at each corner for added strength. 

The rating comes down to the anchor and the base that they are attached to. Our EZY Twist Locks are far stronger than the anchor that they are secured with. We suggest that you check the specifications of the anchor that you are using. 

No, you provide your own as there are many different variants in anchors. They are found at most hardware stores.